Advantagecontrols.com All Coupons

Advantage Controls - Home Page - industrial water

Advantage Controls is the industry leader at combining the latest internet communications, electronic control and metering pump innovations into the most user friendly products for water treatment and control applications. Learn more

Actived: Thursday Nov 28, 2019

URL: http://www.advantagecontrols.com/

Manual NanoTron - Advantage Controls

Set Force On/Off key action here as: Ask, Both, Relay 1, Relay 2 or None. Set Timeout values to desired Forced On time for each relay. If a timer is a Batch it will run for r’s run time when the Force On/Off is pressed. Timers go back to auto mode after Force On/Off time has expired. Enter to access, timer type shown, press Enter again to

Category:  All categories Go URL

Data Sheet - Advantage Controls

bleed-off assembly with option A. Advantage Controls offers a wide range of electrically activated valves for bleed-off of cooling tower water to complement your controller selection. Choose from solenoid valves, motor open-spring or capacitor return ball valves or paddle valves. Make maintenance easy by turning your selected bleed-off

Category:  All categories Go URL

Manual SFS Series - Advantage Controls

normal operation. If forced on or off, the unit will return to normal after 3 minutes. C. System Operation In order to activate the conductivity on the controller both level wands must be down (closed) to start, with the 1st relay on for spraying on bowl 1. Both level wands must be up (open) to stop, to turn the “FILL” relays off. 1.

Category:  All categories Go URL

ANALOG BOILER MANUAL - Advantage Controls

at the end of the sample duration the control relay turns off. Once a sampling or blowdown period is completed, the unit will return to the set sampling interval. 1 230 Volt 50/60 Hz 2 Recorder Output (0-1 mA) 3 High / Low Alarm relay 4 4-20 mA non-isolated output 5 Dry contact for alarm output 8 Unit Prewired- 8" Power Cord with Male plug, 11

Category:  All categories Go URL

Manual NANO-N

Force - Relays may be forced on or off for a user defined amount of time. Press the Force key to force relays on for the time configured in the Menu’s force sub-menu. Press it a second time to force them off for the same amount of time. Press a third time to go back to automatic Run mode.

Category:  All categories Go URL

Manual Model GF - Advantage Controls

MENU ON/OFF 1 2 Wed 10:59:57am MENU FORCE ON/OFF ENTER Press MENU to access menus or go back one layer in menu structure. Press FORCE to activate relays manually again for Off and a third time back to auto. Press ENTER to go a layer deeper in menu, to initiate a setting change and to set change. Use up or down arrows to navigate through

Category:  All categories Go URL

Pump Catalog - Advantage Controls

3 MicroTron Electronic Chemical Metering Pump All MicroTron metering pumps now come standard with Kynar/Teflon liquid ends. Series A Includes a 1 X 16 backlit LCD, on/off & stroke indicator LED, keypad and dust cover.

Category:  All categories Go URL

Manual - Advantage Controls

on the bleed off, another timer or digital input. The relay is activated after a bleed cycle and runs for the set percentage of that bleed cycle. 4. Percentage - The relay is on for a percentage of a continuously repeating cycle time that can be set from 1 minute to 99 hours and 59 minutes. 5.

Category:  All categories Go URL

Manual ZIG-NANO - Advantage Controls

Set Force On/Off key action here as: Ask, Both, Relay 1, Relay 2 or None. Set Timeout values to desired Forced On time for each relay. If a timer is a Batch it will run for the Batch timer’s run time when the Force On/Off is pressed. Timers go back to auto mode after Force On/Off time has expired. Enter to access, timer type shown, press

Category:  All categories Go URL

Opti-Check™

To turn on the Opti-Check, press the button. After a 5 second warm up, the Opti-Check is ready for operation. Pressing the button again will turn the unit off or if left idle for 3 minutes the unit will turn itself off to save battery power. A set of new batteries will last for over 1,000 sample readings. If the batteries have low

Category:  All categories Go URL

Manual ZIG-NANO

Set Force On/Off key action here as: Ask, Both, Relay 1, Relay 2 or None. Set Timeout values to desired Forced On time for each relay. If a timer is a Batch it will run for the Batch timer’s run time when the Force On/Off is pressed. Timers go back to auto mode after Force On/Off time has expired. Enter to access, timer type shown, press

Category:  All categories Go URL

Connecting to the MegaTron in Local Mode

Connecting to the MegaTron in Local Mode As the name implies, this connection method takes place locally, or within the confines of a local area network (LAN). This method involves a direct network connection between the MegaTron controller with an “H1” option and a stand-alone computer or LAN.

Category:  All categories Go URL

ABC Motorized Ball Valve Instructions - Advantage Controls

ABC Motorized Ball Valve Instructions ABC motorized ball valves powered open by line voltage and motor-driven closed by a built in capacitor, when power is removed from the valves. Plumbing Installation • For maximum weather protection, the valve should be mounted in a horizontal pipe run with actuator above the ball valve.

Category:  All categories Go URL

Manual MicroTron - Advantage Controls

• On/Off power indicator light • Pulse or Stroke indicator light • Up and Down arrow keys for setting adjustments • MENU key to enter and exit pump set-up • ENTER key to save desired adjustments NOTE: When installation is made into a line with zero pressure or when pumping into an open vessel, use the

Category:  All categories Go URL

Advantage Controls - Tower Quick Picks - industrial water

Application. Complete MegaTron XS Tower Control Packages. Tower Quick Pick numbers represent our most popular selections for cooling towers, combining MegaTron XS models on a pre-fab panel at a lower price than ordering separately. We have also included several of the most commonly used accessory items that can be added in order to make a complete package.

Category:  All categories Go URL

A Minus - Advantage Controls

non-temperature electrode is included with the Model A Minus. Each time the conductivity of the system water exceeds the operator selected set point the unit will energize the control relay. Once the conductivity falls below the set point (plus the differential), the relay will be turned off.

Category:  All categories Go URL

Manual MICROtron - Advantage Controls

Recycle Timer – Provides a user defined “off” cycle in HH:MM and a user defined “on” cycle in MM:SS that is repeated constantly. 3. 28-Day Timer - 28-day feed timers, typically used for biocide feed are based on a 28-day cycle with two independent programmable feed cycles allowing for feed on selectable days and weeks. 4.

Category:  All categories Go URL

Data Sheet - advantagecontrols.com

• Low level shut-off • ETL approved • Adjustable pressure • Economical Application Advantage Controls EGF glycol feeders provide a compact wall mountable system for feeding and pressurizing small closed loops for snow and ice melt circuits, small boilers/chillers, solar and other heating/cooling coils.

Category:  All categories Go URL

Manual - Advantage Controls

on the bleed off, another timer or digital input. The relay is activated after a bleed cycle and runs for the set percentage of that bleed cycle. 4. Recycle - The relay is continuously repeating a defined OFF cycle time and a user defined ON cycle time. 5. 28 Day - The timer is based on a 28 day cycle with four independent programmable feed cycles

Category:  All categories Go URL

Data Sheet pH/ORP Probes - Advantage Controls

Important considerations for pH/ORP probes 1. The pH Electrode is shipped in a cap containing a solution of pH 4 buffer and potassium chloride. ORP Electrodes are shipped in caps containing a piece of cotton wetted with tap water. The electrode should remain in the cap until it is used.

Category:  All categories Go URL

Manual Model GF - Advantage Controls

relay, menu driven program, manual off auto function on all outputs and 4-20mA outputs. Advantage Controls Glycol Feeders are stand alone pre-wired, pre-plumbed systems designed for ease of installation. Our systems are mounted on a powder coated steel frame with anchor points.

Category:  All categories Go URL

Multi-Jet Meter Installation Instructions

pointer off its shaft and remove the plain pointer from the target dial. Reverse their positions and press them firmly into place. Securely seat the sealing ring and replace the lens, matching the tab on the lens to the notch on the meter to align the sensor with the magnetic pointer dial. Thread the meter top on and tighten. 03/2016

Category:  All categories Go URL

in Series DWT - Advantage Controls

ate devices, such as a chemical pump and bleed-off solenoid in a cooling tower. The controllers work with the contacting head water meter to operate a chemical metering pump in proportion to the volume of water supplied. The controllers automatically resets at the completion of each timed cycle and is ready for a signal from the water meter.

Category:  All categories Go URL

In this issue of Advantage Point

Winter Recap 218 21 Published by Advantage Controls • Muskogee, OK 74403 In this issue of Advantage Point • Jeff O’Neal Promoted to Company President • Advantage Blood Drive • Birthdays •JA in a Day Volunteers

Category:  All categories Go URL

Manual MegaTron - Advantage Controls

on the bleed off, another timer or digital input. The relay is activated after a bleed cycle and runs for the set percentage of that bleed cycle. 4. Percentage - The relay is on for a percentage of a continuously repeating cycle time that can be set from 1 minute to 99 hours and 59 minutes. 5.

Category:  All categories Go URL

Manual Model GF - Advantage Controls

force it on. Press it a second time to turn it off.Once the unit returns to the RUN mode, relays will activate automatically. Description of SET UP Menu Screens The SET UP menu is the main menu circle of set up sub-menus used to customize your unit to the particular parameters needed for your installation.

Category:  All categories Go URL

Device Internet Communications - Advantage Controls

If connecting to the network using a static IP address, the DHCP will need to be off and the static information IP, Mask, Gateway and DNS entered into the controller. If you are connecting to the network using a dynamic IP address, the settings will be applied automatically.

Category:  All categories Go URL

Manual Series 2EZ - Advantage Controls

Off Off Pulse Timer On Off Percent Off On Limit On On Post Bleed 6. 7. For Boiler Units Sampling Off Off Continuous On Off Sample & Hold Off On Timed with 0-7.75 hour Interval 8. Boiler Sample & Hold-Off for normal operation timers on front set Interval and Duration. On to use timers to set Hold and Blowdown (interval knob =

Category:  All categories Go URL

Manual NanoTron P/R - Advantage Controls

Relay 1 will operate off of the falling setpoint and Relay 2 off of the rising. The High, Low Alarm settings and limit timer are the same for single or dual pH set point control. ORP Control (R) – The ORP function monitors and controls ORP on a scale of 0 to +1000 mV using relay 1.

Category:  All categories Go URL

Manual Series R - Advantage Controls

• On/Off power indicator light • Pulse or Stroke indicator light • Up and Down arrow keys for setting adjustments • MENU key to enter and exit pump set-up • ENTER key to save desired adjustments B. Run Mode Explanation The readout will display one of two modes, Run mode and Set-up mode. Run mode is

Category:  All categories Go URL

Data Sheet - Advantage Controls

low level cut-off, audible alarm, motor starter/high amp relay and preplumbed piping assembly with pressure gauge, pressure transducer, back check and relief valve. Optional: Dry contact output for low tank level and pump on, plus BACnet and ModBus compatibility. Digital Glycol Feeder Key Features • Digitally Displayed Pressure

Category:  All categories Go URL

Advantage Controls - Series B - industrial water treatment

Series B pumps come standard with a rotary encoder switch to allow exact stroke speed setting of pumps, on/off indicator light, stroke indicator light and panel dust cover. Note: All MicroTron metering pumps come standard with Kynar/Teflon liquid ends.

Category:  All categories Go URL

Introduction - Advantage Controls

1. Water has been shut-off upstream of the Ultra-S 2. Local shut-off valve on Ultra-S is in the closed position 3. Major leak in the reservoir or solution outlet fitting 4. Pump/eductor pumped faster than .30 GPM for an extended period of time 1.Open valve located upstream 2.Open local shut-off valve on Ultra-S 3.Repair/replace bottom or fitting

Category:  All categories Go URL

Relay Setup - Advantage Controls

RELAY 2 RELAY 3 6 TO 10 RELAY 4 RELAY 5 Step 4: This is the Relay Setup Screen. From here push the MAIN ACTION (Button 1) to go to the next screen. >RELAY 1 SETUP< MAIN ACTION - OFF ACTIVATOR 3DISABLE 1 ACTIVATOR 2 ACTIVATOR 4DISABLE 2 ACTIVATOR 3 DISABLE 3 ACTIVATOR 4 DISABLE 4 00 - DAILY MAX Step 5: This is the Relay Setup screen.

Category:  All categories Go URL

Dual Biocide Timers Models BC-2 and BC-2A Table of

The test procedure will activate both the FEED TIMER (and on the BC-2A the LOCK OUT TIMER). The timer output plug (A or B) will be activated during a test, the BLEED output will be off during a test. To TEST. When the FEED TIMER LED is off, push and hold the TEST BUTTON for 2 seconds. This will start the FEED TIMER cycle, and power the output.

Category:  All categories Go URL

went and elerate the ahievements of the Advantage the star

off is one of the many citywide events that is part of the annual Azalea Festival in Muskogee. The Azalea Festival, held annually since April 1968, has become a national attraction. This festival highlights the beauty of the Honor Heights Park, plays host to a variety of food vendors,

Category:  All categories Go URL

Data Sheet NanoTron P/R - Advantage Controls

The NanoTron-P/R provides compact micro-processor based pH or ORP control with many standard features and the flexibilityto adapt to a variety of applications. The NanoTron’s simple step through menu providesuser-definedconfiguration of set point relay activation with differential,high and low alarm.

Category:  All categories Go URL

HanTron - Home Page - industrial water treatment

Power turns off automatically after 30 seconds of inactivity. Storing Sample Measurements to Memory The tester can save up to 20 readings. 1. / SAVE: Displays next available memory location. 2. SAVE/ or : To select a specific memory location. 3. ENTERREAD/ : Stores conductivity and temperature data in location shown. 4.

Category:  All categories Go URL

MicroTron - Advantage Controls

A-6 On/Off power switch A-7 Lower enclosure D 220 V service (conduit only) E Mounted flow switch assembly M Alarm relay output M-1S Sonic alarm buzzer with silence switch V Digital input for bleed-off water meter W Power relay 1.5 HP max, 25 amps X Tank low level alarms Z-9 Chem A lockout with biocide

Category:  All categories Go URL

Microprocessor Control of - Advantage Controls

Data Sheet Microprocessor Recycle - OFF and ON cycle; HH:MM:SS Limit - Limits feed with bleed Post - 1-100% of post bleed or other time with an over all limit. 28 Day - biocide timer. Enclosure Heavy duty NEMA 4X style high impact ABS with padlockable gasketed Lexan viewing door.

Category:  All categories Go URL

NanoTron General Troubleshooting Guide - Advantage Controls

NanoTron Quick Steps Factory Reset Procedure Step 1: Remove power from the NanoTron. Step 2: Unscrew the faceplate from the casing. Step 3: Flip dipswitch 3 up to the ON position. Step 4: Return power to the NanoTron. Step 5: Wait for the “Clearing Memory” or “Memory Cleared” message to appear on the display. Step 6: Remove power from the NanoTron. Step 7: Flip dipswitch 3 down to the OFF

Category:  All categories Go URL

Data Sheet - Advantage Controls

D1 3/8” Bulkhead fitting with PVC shut off w/ Buna seal D2 1/4” Bulkhead fitting with PVC shut off w/ Buna seal F Flat top with 2” bung L 2” bung for level wand M Premount pump (ordered separate) P Non Advantage pump adapter plate P1 Pump mount plate for top of ATS-10 S MNPT drain valve T Pump priming tube return fitting

Category:  All categories Go URL

Data Sheet Loop Guard - Advantage Controls

Data Sheet Closed Loop Corrosion Monitoring and Feed Panels Loop Guard FORCE MENU ON/OFF NanoTron 1 2 ENTER Key Features • Simplify installation • Convenient Configuration • Sample Stream Options • Customize to your System • Corrosion Resistant Panel • Save Time and money • Professional appearance Application

Category:  All categories Go URL

Web Connectivity via Cell ROUTER-3 Internet

2 Controller assigned static IP (DHCP:Off). Not used with cellular connections. Enable DHCP as directed in Steps 2 through 4. 3 No network detected or CAT5 cable not plugged in. 4 If a card is present and you are getting CS, check that the comm card is properly seated into the carrier board.

Category:  All categories Go URL

4-20mA Input • Relay Setup - Advantage Controls

This is the Relay Setup Screen. From here push the MAIN ACTION (Button 1) to go to the next screen. >RELAY 5 SETUP< MAIN ACTION - OFF DISABLE 1 ACTIVATOR 2 DISABLE 2 ACTIVATOR 3 DISABLE 3 ACTIVATOR 4 DISABLE 4 00 - DAILY MAX Step 5: From here select the Main Action that is going the drive your relay by using the Arrow buttons. Then press ENTER.

Category:  All categories Go URL

Advantage Controls - Tower Accessories - industrial water

Description. Get the Advantage of everything needed to complete your water treatment installation. A broad line of accessories is available to finish the job!

Category:  All categories Go URL

Manual - Advantage Controls

Manual MegaTron Controller Supplemental Auxiliary Flow Meter Instructions Notice: This manual includes instructions for the Auxiliary Flow Meters that is not covered in the main MegaTron manual but will refer to items covered in the main manual.

Category:  All categories Go URL

Manual NanoTron-M

the OFF position. Never open the front panel without first disconnecting power from the outlet. Prewired controllers are supplied with an 8 foot, 18 AWG power cord with USA style plug. A #1 Phillips driver is required to open the front panel. 2. Low voltage signal wires (probes, flow switch, water meter, etc.) should never be run

Category:  All categories Go URL

Data Sheet Models - Advantage Controls

Data Sheet Flow Controllers Key Features • NEMA 4X Type Enclosure • Simple to Operate • LED Indicator Lights • Prewired Configuration • Test Switch • 2 Year Warranty Application Advantage Controls’ model FL-1 flowcontrollers provide on / off control of chemical feed pumps or other equipment based on flowthrough a sample stream.

Category:  All categories Go URL

Top Categories

 › Christmas
 › Boxing Day
 › Bed Bath
 › Railcard
 › Lyft
 › Walmart
 › Target
 › Pizza Hut
 › Printable
 › John Lewis
 › Asda
 › Papa Johns
 › Uber
 › Stubhub
 › Ps4

Recently Searched

 › Lighted water lanterns discount code

 › Hackettstown oil promotional code

 › Hackettstown oil promotional code

 › Hackettstown oil promotional code

 › Hackettstown oil promotional code

 › Endocrine society promo code

 › Coupon for ece evaluation

 › Coupon for ece evaluation

 › Usa novadevelopment.com promo 44222

 › Coupon for ece evaluation

Popular Searched